8615530705790
yafengbaowen@gmail.com
enLanguage
Faced Glass Wool in Rolls
Faced Glass Wool in Rolls

Faced Glass Wool in Rolls

Product form: glass wool roll with facing. faced glass wool in rolls is prepared for metal building roofs, duct wraps, ceiling layers, and warehouse insulation.
Send Inquiry

Description

 

Faced glass wool in rolls gives a practical insulation layer for metal building roofs, duct wraps, ceiling layers, and warehouse insulation. It is not selected by one number only because thickness, density or grade, facing, and joint treatment all affect the finished work. When the route includes corners, flanges, hanging rods, or narrow wall spaces, the product is prepared around faced roll handling and the installation method.

1 4

 

Product Parameters

 

Parameter

Specification

Material

Centrifugal glass wool roll or blanket

size

Length:10000mm-32000mm
Width:1150 mm/1200mm

Thickness

30mm-100 mm common thickness by thermal or acoustic need

Density

10-48 kg/m³ by order

Thermal Conductivity

0.034-0.062 W/(m·K)

Combustibility

Non-combustible Grade A

Hydrophobicity / Fiber

Hydrophobicity ≥98%; average fiber diameter 5-8 μm

 

Installation Notes

 
 
01
 

Before fixing faced glass wool in rolls, mark corners, flanges, brackets, and access openings on the route.

 
02
 

Cut small pieces after measuring the actual gap. Forcing a large piece into a tight place can open the seam later.

 
03
 

Keep nameplates, valves, inspection covers, and drainage points visible unless the drawing asks for full covering.

1 1

 

Certifications & Qualifications

 

product-1190-1682

For faced glass wool in rolls, the facing material and roll size should be written in the order, while the supplied certificate file should not be renamed.

Company system qualifications available in the company document set: Quality Management System Certificate (Certificate No. FAP25259601QRO, GB/T 19001-2016 / ISO 9001:2015), Environment Management System Certificate (Certificate No. FAP25259601ERO, GB/T 24001-2016 / ISO 14001:2015), and Occupation Health And Safety Management System Certificate (Certificate No. FAP25259601SRO, GB/T45001-2020 / ISO 45001:2018).

Reference conformity file available: UDEM Technical Inspection Attestation of Conformity for Fiberglass Board, EN 13162:2012+A1:2015, certificate No. M.2025.206.C125154.

The certificate model is Xinyafeng/48kg_1200*600*50mm and applies to board form. For faced rolls, prepare TDS, MSDS, packing label, and any requested roll test file separately.

Documents can be grouped with roll width, thickness, facing type, and packing marks before loading.

 

FAQ

 

Q: How can wrong material form be avoided?

A: The order should state board, roll, blanket, tube, or wrap clearly. Similar names can still mean different installation methods.

Q: What should be watched when installing faced glass wool in rolls?

A: Keep the surface clean, avoid sharp burrs, close seams, and leave access covers or labels visible if the drawing needs them.

Q: Is facing always required?

A: Not always. Facing depends on visible surface, moisture control, fire report, and whether the material needs easier cleaning or taping.

Hot Tags: faced glass wool in rolls, China faced glass wool in rolls manufacturers, suppliers, factory