8615530705790
yafengbaowen@gmail.com
enLanguage
Aluminum Faced Glass Wool Board
Aluminum Faced Glass Wool Board

Aluminum Faced Glass Wool Board

Aluminum faced glass wool board is supplied for fresh-air, supply-air, and return-air ductwork, including routes inside equipment rooms.
The duct dimensions and air-conditioning design determine board or blanket size, thickness, and density. Facing, hangers, access covers, seams, and the certificate required for the chosen form are reviewed before production.
Send Inquiry

Description

 

Aluminum faced glass wool board reduces heat exchange and can help control condensation or transmitted sound along an air-duct route. The layer must remain continuous across flat sides and corners without blocking brackets, nameplates, dampers, or service openings. We set the cutting plan around actual duct dimensions, then confirm the facing and fixing method so the surface is not weakened by repeated trimming.

c85a6370-2739-43db-a139-1c8e753938d6

 

Product Parameters

 

Board property

Declared range or value

Base material

Fiberglass / glass wool board

Thermal conductivity

0.034-0.062 W/(m·K)

Density range

30-110 kg/m³; the certificate model uses 48/64 kg/m³

Certified size

1200 x 600 Customization supported

Reaction to fire

Non-combustible Grade A

Moisture data

Hydrophobicity ≥98%; moisture rate ≤5%

Fiber quality

Average fiber diameter 5-8 μm; slag inclusion ≤0.3%

 

Main Applications

 
 
01
 

Use full-width pieces along straight duct sides and plan separate cuts for elbows, transitions, flanges, and support points.

 
02
 

Install aluminum faced glass wool board only after sharp burrs, standing water, and unfinished hot work have been removed from the route.

 
03
 

Where maintenance is expected, keep dampers, labels, and removable covers accessible instead of sealing over them.

7

 

Certifications & Qualifications

 

product-1190-1682

Document selection follows the supplied form. A board placed on ductwork is supported differently from a roll or blanket used around the same route.

For board supply, the available conformity record is the UDEM Technical Inspection Attestation of Conformity for Fiberglass Board, EN 13162:2012+A1:2015, certificate M.2025.206.C125154.

The listed model is Xinyafeng/48kg_1200*600*50mm. If the aluminum faced glass wool board is ordered as a roll or blanket, the matching document must be confirmed before a certificate image is attached.

Management certificates can be supplied for quality (FAP25259601QRO), environment (FAP25259601ERO), and occupational health and safety (FAP25259601SRO), under the relevant ISO 9001, ISO 14001, and ISO 45001 systems.

TDS, MSDS, test records, packing information, and customs documents are prepared according to the final material form.

 

FAQ

 

Q: Where do installation defects most often begin?

A: Corners, penetrations, and cut joints need the closest check because an open edge can affect thermal, moisture, or acoustic performance.

Q: Which order details can be adjusted?

A: The buyer can confirm size, thickness, density, facing, accessories, and package identification before production.

Q: What should be inspected after unloading?

A: Check bundle marks, quantities, dimensions, surface condition, and whether the documents describe the material form received.

Hot Tags: aluminum faced glass wool board, China aluminum faced glass wool board manufacturers, suppliers, factory